品牌：UD優道

系統：引擎艙保養

引擎外部清潔劑    發動機鍍膜劑

產品編號：UD-222-2/ 325ML   UD-221-1/125ML

企業標準：Q/YK 034-2009        Q/YK 026-2009   

產品僅供4S店使用

引擎外部清潔劑 

產品性能：

本產品由多種表面活性劑、滲透劑、保護劑等配制而成，產品分解去污能力強，對各種材質的部件無腐蝕，對發動機表面的油漬、污垢物質有很好的清潔作用。

使用方法：

1、先用龍卷風清洗槍將發動機外部用清水沖去泥沙、灰塵；

2、用專用工具將本品噴灑在發動機外部，并浸泡2-5分鐘；

3、用毛刷去油泥嚴重的地方；

4、用清水將發動機外部清洗干凈，并吹干線路接頭。

注意事項：

1、本品應在陰涼、干燥通風處存放，遠離火源；

2、嚴禁入口，濺入眼內請立即用清水沖洗；

3、遠離兒童。

發動機鍍膜劑

產品性能：

防止線路、線束、水管、皮帶等橡膠制品的龜裂老化現象；超強的滲透性能，能有效修復線路上的細微裂縫，使用后在發動機電路表面及接插頭處形成絕緣膜，隔絕水氣，抗氧化；防止線路開路、短路、爆裂，防止自燃事故的發生，提高汽車電路工作效率，還原發動機動力。

使用方法：

1、將發動機外部吹干；

2、用專用噴槍將本品均勻噴涂在發動機外部；

3、用毛巾擦去噴涂不均勻的地方；

4、待噴完3分鐘，檢查噴涂效果即可交車。

注意事項：

1、本品應在陰涼、干燥通風處存放；

2、嚴禁入口，濺入眼內請立即用清水沖洗，遠離兒童；

3、嚴禁將本品直接噴涂在高溫的發動機部件，以免引起危險！

4、眼睛接觸，請立即用大量清水沖洗，并立即就醫，如誤食，不要催吐，立即就醫，并出示該產品的盛裝容器或標簽。

Engine exterior cleaner

Product performance:

This product by a variety of surface active agent, penetrating agent, protective agent made from, such as product decomposition decontamination capability, no corrosion of all kinds of parts, the engine oil and dirt on the surface of the material has good cleaning effect.

Usage:

1. First, use the tornado cleaning gun to flush the outside of the engine with water to remove sediment and dust;

2. Spray the product on the outside of the engine with special tools and soak for 2-5 minutes;

3. Use a brush to remove serious sludge;

4. Clean the outside of the engine with clean water and blow dry the wiring connector.

Notes:

1. This product should be stored in a cool, dry and ventilated place, away from the source of fire;

2. It is strictly prohibited to enter the entrance, and please flush with water immediately after splashing into the eyes;

Stay away from children.

Engine coating agent

Product performance:

Prevent cracks and aging of rubber products such as lines, wire bundles, water pipes and belts; Super permeability, can effectively repair the minor cracks on the line, after the use of the engine circuit surface and plug where the insulation film, water and gas isolation, anti-oxidation; Prevent the circuit opening, short circuit, burst, prevent the occurrence of spontaneous combustion accident, improve the working efficiency of automobile circuit, restore the engine power.

Usage:

1. Blow the outside of the engine dry;

2. Spray the product uniformly on the outside of the engine with a special spray gun;

3. Use the towel to wipe away the uneven spray areas;

4. After 3 minutes of spraying, check the spraying effect and hand it in.

Notes:

1. The product should be stored in a cool, dry and ventilated place;

2. It is strictly prohibited to enter the entrance. If it is splashed into the eyes, please immediately rinse it with water and keep away from children.

3. It is strictly prohibited to spray this product directly on high-temperature engine parts, so as to avoid the danger!

4. In case of eye contact, please rinse immediately with plenty of water and seek medical advice immediately. If you eat the product by mistake, do not urge vomiting, seek medical advice immediately, and show the container or label of the product.